|
Jun Air 4-4
Artimagination is proud to be associated with Jun Air compressors. We highly recommend these compressors as we believe they are the best available on the market.
The Model 4 is ideal when an efficient quiet compressor is required. These compressors operate silently and without vibration. The compressor is supplied with handles for easy transporatation.
The compressor comes as a complete compressed air package with motor, piston compressor and air receiver. This model has a 4 litre tank, weighs 17kg and works at 45dB. 120psi max. RRP £555.00
|
| |
|
Jun Air 4-15
Artimagination is proud to be associated with Jun Air compressors. We highly recommend these compressors as we believe they are the best available on the market.
The Model 4 is ideal when an efficient quiet compressor is required. These compressors operate silently and without vibration. The compressor is supplied with handles for easy transporatation.
The compressor comes as a complete compressed air package with motor, piston compressor and air receiver. This model has a 15 litre tank, weighs 22kg, works at 45dB. 120psi max. RRP £599.00
|
| |
|
Jun Air 4-25
Artimagination is proud to be associated with Jun Air compressors. We highly recommend these compressors as we believe they are the best available on the market.
The Model 4 is ideal when an efficient quiet compressor is required. These compressors operate silently and without vibration. The compressor is supplied with handles for easy transporatation.
The compressor comes as a complete compressed air package with motor, piston compressor and air receiver. This model has a 25 litre tank, weighs 25kg, 45dB noise level and 120 psi max pressure. RRP £625.00
|
| |
|
Iwata Power Jet Pro
This compressor is oil less. Powerful, compact and quiet. It has a 2 litre tank reservoir which allows a greater moisture separation and smoothes out the air flow.
|
| |
|
Euro-Tec 10A
Well priced mini compressor for beginners.
Suction capacy: 16ltr/p/m
Max pressure: 58 psi
Air Receiver: None
Noise: 38dB
Weight: 3.5kg
Product code: 160050
|
| |
|
Can of Compressed Air
Ideal starting place for learning to airbrush. Cans of air can be fitted to most airbrushes (you may require a valve) to allow you to start airbrushing without the need of buying a compressor. Alternatively use compressed cans of air for airbrushing 'in the field'. 600ml can will last approx. 1 hour continous use.
|
| |
|
Compressed Air Valve
This valve comes with a regulator function so that you can regulate the amount of air being released from the can.
This valve fits all quick release hoses supplied with Harder & Steenbeck & Hansa airbrushes, there is also an adaptor for other air hoses. The valve screws directly onto the can and the airbrush hose is then fitted to the side.
|
| |
|
BSP 'T' Fitting 2 way manifold
Fits on an air outlet allowing up to two airbrushes to be used simultaneously.
|
| |
|
|
Quality Filter Regulator DRA43394
High spec. filter regulator . Will remove moisture and oil particulates from air. Essential for compressors not fitted with regulators and/or moisture traps.
AVOID CHEAP IMITATIONS/IMPORTS!
Poor build quality may eventually cause damage to your spraying equipment!
|
| |
|
Coil Hoses
Essential attachment for most spray guns.
1/4 inch female female fitting.
|
| |
|
|
Airbrush hoses
2 meter hose with quarter inch BSP female and quick release coupling.
Available as either plastic hose or braided hose.
Plastic Hose:
|
| |
